Certified for Class I, Div 1, Groups B, C & D
The Model 330SDS H2S Analyzer utilizes field-proven, tape-based technology that provides a linear and interference-free output of H2S on two streams simultaneously. An optional Total Sulfur measurement can be added to the analyzer as one of the streams.
Two simultaneous measurements at the same time with no stream switching
Each measurement can be a different range
Fast response times using Rapid Response Algorithms (RRA) 20 seconds to alarm
No interference from other components in the sample
Low power consumption < 3 Watts
Extended tape life of 60-90 days
Measures up to 5 times the calibrated range
Full field service & training available
|Power||12-24 VDC @ less than 3 watts or 100-240 VAC, 50/60 HZ|
|Electrical classification||Certified for Class I, Div 1 Grps B, C, & D|
|Ambient Temperature||0-50 °C (32 to 122 °F) std. Contact for other requirements.|
Standard Ranges: 0-5ppm up to 0-100ppm
Custom Ranges Available: ppb levels and >150ppm to 30%
|Accuracy / Repeatability||
|Inputs||Four digital inputs individually configurable.|
|Outputs||Dual isolated 4-20 mA (loop power).
(Modbus) serial RS-232 & RS-485 (Ethernet available).
Four 5 amp SPDT alarm relays (high reading, high high reading, low tape, low pressure, low temperature, fault).
Four solid state solenoid drivers (auto cal, total sulfur, stream switching, valve actuator).
|Displays||128 x 64 Graphic Display
Menu is scrolled by internal button or external magnet.
|Dimensions||17.4″W x 32.7″H x 13.7″D
(44.2 W x 83.1 H x 34.8 D cm)
The Model 330SDS is mounted on a 24″W x 36″H x ¼”
(60.96 W x 91.44 H x 0.635 L cm) thick anodized panel.
|Configuration Software||Windows® software for customer configuration, archive retrieval, and Modbus mapping.|
|Note||Product specifications subject to change without notice to improve reliability, function, design, or otherwise.|
The Model 330SDS measures H2S and/or Total Sulfur in natural gas, petrochemical streams, condensate, liquids, or LPG. Common applications include:
I.C.E. (Integrated Configuration Environment) is a Windows® based program that accompanies all 330S Analyzers for full configurability.
If you have the model 330S or 331S ICE software download below
|SDS Dual Stream||The 330SDS Analyzer measures two streams at the same time.|
|Total Sulfur||Total Sulfur furnace converts all sulfur compounds to H2S which allows the analyzer to measure Total Sulfur.|
|CO2||Dual-beam IR bench. CO2 concentration is displayed on the second line of display and can be configured as a 4-20 mA analog output. CO2 ranges from 0-20% to 0-100%|
|Stream Switching||Allows switching of four (4) input streams or from H2S to Total Sulfur measurement.|
|Dilution||Allows measurements up to 30% H2S using permeable membrane dilution.|
|Liquid Sampling||Liquid sample system to measure H2S in Hydrocarbon liquids or water.|
|Custom Systems||Envent can design custom integrated systems to meet application requirements.|